AmChemteq, Inc 7052 S.Eagle Valley Road, Port Matilda, PA 16870
                   Ph: 8142340123   Fax: 888 266 9003
About Us Products Services Order Contact Us Home
Gas Chromotography

AmChromteq

AmChemteq, Inc is founded to manufacture and deliver the finest GC Capillary Columns and HPLC Columns and Accessories .

ACI capillaries are cross-linked and surface bonded yielding solvent rinse-able, low bleed, high performance columns. Proprietary high temperature deactivation techniques ensure the inertness needed for today’s demanding analyses.

All ACI columns are individually tested to ensure proper performance. Experience has shown us that columns made from the same lot of tubing, the same deactivant and phase solutions, bonded and conditioned using the same equipment come out different. Like caring for children we carefully manufacture each column and monitor them along each step of production and testing. This benefits both you and us. You get consistent high performance columns and we get fewer failures.

Column testing should be performed both isothermally and programmed. Isothermal testing is performed first to accurately assess efficiency and inertness. Temperature programming during this phase of the testing does not yield the familiar theoretical plate counts and may hide /obscure inertness problems by artificially sharpening the peaks. Once this testing is complete the columns should be programmed up in temperature to assess the bleed levels.

ACI capillary columns are pre-rinsed to ensure the completeness of the cross-linking and surface bonding. Please take the opportunity to read the Installation Manual that comes with each column. It contains vital information to ensure proper efficiency, inertness and low bleed from your new ACI column.

ACI-1 Capillaries Methyl silicone

Fully Cross-linked and Surface Bonded

Solvent Rinseable

Individually Tested for Inertness, Efficiency and Bleed

Temperature Limits (0.25mm film thickness)

Minimum -60°C

Maximum Isothermal 340°C

Maximum Programmed 350°C

Similar Phases

AT-1, BP-1, CP Sil 5CB, DB-1, Equity-1, HP-1, MDN-1,OV-1, RTx-1, SE-30, SPB-1, Ultra-1, VB-1, VF-1, ZB-1, 007-1

 

ACI-5 Capillary Columns

5% Phenyl methyl silicone

Fully Crosslinked and Bonded

Solvent Rinseable

Individually Tested for Inertness, Efficiency and Bleed

Temperature Limits (0.25mm film thickness)

Minimum -60°C

Maximum Isothermal 325°C

Maximum Programmed 340°C

Similar Phases

AT-5, BP-5, CP Sil 8CB, DB-5, Equity-5, HP-5 , MDN-5, RTx-5, SE-54, SPB-5, Ultra-2, VB-5, VF-5, XTI-5, ZB-5, 007-5

 

ACI-1701 Capillary Columns

14% cyanopropyl silicone

Fully Crosslinked and Bonded

Solvent Rinseable

Individually Tested for Inertness, Efficiency and Bleed

Temperature Limits (0.25mm film thickness)

Minimum -60°C

Maximum Isothermal 270°C

Maximum Programmed 280°C

Similar Phases

AT-1701, BP-10, CP Sil 19CB, DB-1701, OV-1701, RTx-1701, SPB-1701, VB-1701, ZB-1701, 007-1701


ACI-Wax Capillary Columns

Polyethylene glycol

Fully Crosslinked and Bonded

Solvent Rinseable

Individually Tested for Inertness, Efficiency and Bleed

Temperature Limits (0.25mm film thickness)

Minimum 40°C

Maximum Isothermal 260°C

Maximum Programmed 280°C

Similar Phases

AT-Wax, BP-20, BTR-CW, CP-Wax 52CB, DB-Wax, DB-WAXetr, HP-INNOwax, Stabilwax, Supelcowax-10, VB-Wax, 007-CW

 

ACI-FFAP Capillary Columns

Polyethylene glycol nitroterethalic acid

Fully Crosslinked and Bonded

Solvent Rinseable

Individually Tested for Inertness, Efficiency and Bleed

Temperature Limits (0.25mm film thickness)

Minimum 40°C

Maximum Isothermal 250°C

Maximum Programmed 260°C

Similar Phases

AT-1000, BP-21, CP-Wax 58CB, DB-FFAP, HP-FFAP, Nukol, Stabilwax-DA, VB-FFAP, ZB-FFAP

The following Dimensions are available along with custom columns.

Cyclodextrin columns with a-,b-,g-CD with different percentage in different stationary phase are also available as custom columns.

  • Common Dimensions

  • Other Dimensions Available

We make custom columns as per your needs.

                                



Kindly contact us for pricing, quantity and terms and conditions
Ph: 814 234 0123 (7074); Fax: 888 266 9003; email: info@amchemteq.com

TOP